Freewing A-10 Thunderbolt II Super Scale Twin 80mm EDF Jet PNP RC Airplane
1,6 Channel Radio.
2,6 Channel receiver
3,6 Cell 5000 mAh LiPo batteries
Note:
If your shipment is delivered to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp
This Products is available in stock.
This Products is available in stock.
This Products is available in stock.
we will ship the package within 48 hours after the buyers pay money by paypal
Freewing A-10 Thunderbolt II Super Scale Twin 80mm EDF Jet RC airplane
In the air, the A-10's all-new power system delivers a fully scale flight profile. Tall vertical loops, hard "jinking" turns, stable slow flight, and authoritative power. Critically, this model was designed to fly at all throttle points, both upright and inverted, without pitch sensitivity. There isn't any nose weight in this A-10; instead various factors were optimized in concert so you won't need lots of up elevator to fly level, and varying power suddenly won't cause the nose to pitch up or down.
As a semi-scale model, the Freewing 80mm A-10 is finished from the factory in USAF two tone gray. A waterslide decal set with over 50 utility markings and three complete A-10 liveries, is included for the pilot to customize his or her A-10. These decals proudly represent Indiana's 163rd Fighter Squadron "Blacksnakes", Louisiana's 47th Fighter Squadron "Termites" and Georgia's 23rd Fighter Group "Flying Tigers."
For pilots wanting to install a matched pair of their own 90mm EDFs on 6s, we will also be offering a 90mm nacelle which bolts into place and retains the outer dimensions of the stock 80mm nacelle. Own the world's largest, most capable, most customizable, and most powerful foam electric PNP A-10 and add a definitive scale powerhouse to your hangar today!
- Largest foam electric PNP A-10 Warthog in the world
- Full complement of highly detailed weapons included in the box (CAS loadout)
- Weapon plyons are individually removable from the wing and each weapon can be placed on any of the 8 included plylons for total customization.
- 90mm bolt-on nacelles for those who wish to install a 90mm power system (sold separately)
- Award Winner at AEF 2017 for "Best Scale Jet"
- High scale fidelity
- Qualifies as Giant Scale Class per AMA rules
- Grass-ready retracts with metal trunions and 5mm hardened steel pin
- Multi-material (full carbon fiber spars, plywood ribs, and aluminum blocks) wing structure for best balance of rigidity and smooth flight handling
- Scale wheel hubs and sequenced nose gear door
- DayBright LEDs and sequenced landing light
- Screw-on wings and tail surfaces
- Flexible wing wire harness for ultimate reliability and resistance to disconnection during wing flexing
- Spacious battery bay, no cutting required
- Digital Metal Gear Servos throughout
- Three unique livery options and 50 different utility decals are included in the box for maximum customization
- Model officially licensed by Northrop Grumman
INCLUDES:
- Freewing A-10 Thunderbolt II Super Scale Twin 80mm EDF Jet - PNP
REQUIRES:
- 6 Channel Radio - Select a minimum 6 channel radio
- 6 Channel Receiver - Select a minimum 6 channel receiver
- TWO 6 Cell 22.2V 4000 - 6000 mAh LiPo Batteries with EC5 Connectors - We recommend 2 Admiral 6 Cell 5000 mAh LiPo batteries
- 6 Cell Compatible Battery Charger - Select a minimum 6 cell (6S) charger from our Charger Collection
PRODUCT SPECIFICATIONS:
Wingspan |
1700mm / 66.92in |
Length |
1551mm / 61.06in |
Flying Weight |
5406g / 190.69oz with two 6S Admiral 4000 mAh LiPo Batteries |
| CG (Center of Gravity) | 78mm back from the leading edge of the wing root, with the aircraft upright and gear down |
Power System |
2x 3530-1900KV Brushless Outrunner Motors |
Electronic Speed Control |
2x 100 Amp ESCs with EC5 Connectors |
Propeller / EDF |
2x 80mm EDFs with 9 Blade Fans |
Servos |
9g metal gear digital standard with two 300mm leads : landing gear door |
| Landing Gear | Grass-ready scale oleo nose strut and tensioned trailing link main struts |
Required Battery |
2x 6S 22.2V 4000mAh - 6000mAh LiPo with EC5 Connector |
Required Radio |
6+ Channel |
| Ailerons | Yes |
Elevator |
Yes |
| Rudder | Yes |
Flaps |
Yes |
Lights |
Yes |
Hinge Type |
Nylon reinforced hinges |
| Material | EPO Foam |
| Skill Level | Advanced |
| Build Time | 1 Hour |
| Recommended Environment | Outdoor |
